Phoenix Contact FL SWITCH GHS 12G/8, User Manual, Page: 196 / 242

FL SWITCH GHS CLI
6-12
PHOENIX CONTACT 8039_en_01
ip ssh
Use this command to enable SSH access to the system. (This command is the short form of
the
ip ssh server enable
command.)
ip ssh protocol
This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1
(1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
ip ssh server enable
This command enables the IP secure shell server.
no ip ssh server enable
This command disables the IP secure shell server.
sshcon maxsessions
This command specifies the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is 0
to 5.
Default disabled
Format ip ssh
Mode Privileged EXEC
Default 1 and 2
Format
ip ssh protocol [1] [2]
Mode Privileged EXEC
Default disabled
Format
ip ssh server enable
Mode Privileged EXEC
Format
no ip ssh server enable
Mode Privileged EXEC
Default 5
Format
sshcon maxsessions <0-5>
Mode Privileged EXEC
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx