Port Security Commands
8039_en_01
PHOENIX CONTACT
2-79
show port-security
This command displays the port-security settings. If you do not use a parameter, the
command displays the settings for the entire system. Use the optional parameters to display
the settings on a specific interface or on all interfaces.
For each interface, or for the interface you specify, the following information appears:
show port-security dynamic
This command displays the dynamically locked MAC addresses for the port.
show port-security static
This command displays the statically locked MAC addresses for port.
Format
show port-security
[{<slot/port> | all}]
Mode
Privileged EXEC
Term
Definition
Admin Mode
Port Locking mode for the entire system. This field displays if you do not supply any parameters.
Term
Definition
Admin Mode
Port Locking mode for the Interface.
Dynamic Limit
Maximum dynamically allocated MAC Addresses.
Static Limit
Maximum statically allocated MAC Addresses.
Violation Trap
Mode
Whether violation traps are enabled.
Format
show port-security dynamic
<slot/port>
Mode
Privileged EXEC
Term
Definition
MAC Address
MAC Address of dynamically locked MAC.
Format
show port-security static
<slot/port>
Mode
Privileged EXEC
Term
Definition
MAC Address
MAC Address of statically locked MAC.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx