FL SWITCH GHS CLI
6-42
PHOENIX CONTACT
8039_en_01
the previously configured RADIUS accounting server is removed from the configuration. The
<ipaddr|hostname>
parameter must match the IP address or hostname of the previously
configured RADIUS authentication / accounting server.
radius server key
This command is used to configure the shared secret between the RADIUS client and the
RADIUS accounting / authentication server. Depending on whether the 'auth' or 'acct' token
is used, the shared secret is configured for the RADIUS authentication or RADIUS accounting
server. The IP address or hostname provided must match a previously configured server.
When this command is executed, the secret is prompted.
Text-based configuration supports Radius server’s secrets in encrypted and non-encrypted
format. When you save the configuration, these secret keys are stored in encrypted format
only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the show running config command’s display, these secret keys are displayed in
encrypted format. You cannot show these keys in plain text format.
Example:
The following shows an example of the CLI command.
radius server key acct 10.240.4.10 encrypted <encrypt-string>
radius server msgauth
This command enables the message authenticator attribute for a specified server.
no radius server msgauth
This command disables the message authenticator attribute for a specified server.
Format
no radius server host
{auth | acct} <ipaddress|hostname>
Mode
Global Config
Note:
The secret must be an alphanumeric value not exceeding 16 characters.
Format
radius server key
{auth | acct} <ipaddr|hostname> [encrypted <encrypted-
password>]
Mode
Global Config
Format
radius server msgauth
<ipaddr|hostname>
Mode
Global Config
Format
no radius server msgauth
<ipaddr|hostname>
Mode
Global Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx