FL SWITCH GHS CLI
2-92
PHOENIX CONTACT
8039_en_01
Location
Subtype: elin
Info: xxx xxx xxx
Extended POE
Device Type: pseDevice
Extended POE PSE
Available: 0.3 Watts
Source: primary
Priority: critical
Extended POE PD
Required: 0.2 Watts
Source: local
Priority: low
show lldp med remote-device
Use this command to display the summary information about remote devices that transmit
current LLDP MED data to the system. You can show information about LLDP MED remote
data received on all valid LLDP interfaces or on a specific physical interface.
Example:
The following shows example CLI display output for the command.
(FL SWITCH GHS Firmware Routing) #show lldp med remote-device all
LLDP MED Remote Device Summary
Local
Interface Device Class
--------- -----------------
1/0/8 Class I
1/0/9
Not Defined
1/0/10
Class II
1/0/11 Class
III
1/0/12 Network
Con
show lldp med remote-device detail
Use this command to display detailed information about remote devices that transmit current
LLDP MED data to an interface on the system.
Format
show lldp med remote-device
{<slot/port> | all}
Mode
Privileged EXEC
Format
show lldp med remote-device detail
<slot/port>
Mode
Privileged EXEC
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx