Port-Based Network Access Control Commands
8039_en_01
PHOENIX CONTACT
2-41
dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state
machine on this port. Depending on the token used and the value (in seconds) passed,
various timeout configurable parameters are set. The following tokens are supported:
no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state
machine on this port to the default values. Depending on the token used, the corresponding
default values are set.
show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on
the tokens used.
Tokens
Definition
reauth-period
The value, in seconds, of the timer used by the authenticator state machine on this port to determine
when re-authentication of the supplicant takes place. The reauth-period must be a value in the range 1
- 65535.
quiet-period
The value, in seconds, of the timer used by the authenticator state machine on this port to define periods
of time in which it will not attempt to acquire a supplicant. The quiet-period must be a value in the range
0 - 65535.
tx-period
The value, in seconds, of the timer used by the authenticator state machine on this port to determine
when to send an EAPOL EAP Request/Identity frame to the supplicant. The quiet-period must be a
value in the range 1 - 65535.
supp-timeout
The value, in seconds, of the timer used by the authenticator state machine on this port to timeout the
supplicant. The supp-timeout must be a value in the range 1 - 65535.
server-timeout
The value, in seconds, of the timer used by the authenticator state machine on this port to timeout the
authentication server. The supp-timeout must be a value in the range 1 - 65535.
Default
•
reauth-period: 3600 seconds
•
quiet-period: 60 seconds
•
tx-period: 30 seconds
•
supp-timeout: 30 seconds
•
server-timeout: 30 seconds
Format
dot1x timeout
{{reauth-period <seconds>} | {quiet-period <seconds>} | {tx-
period <seconds>} | {supp-timeout <seconds>} | {server-timeout <seconds>}}
Mode
Interface Config
Format
no dot1x timeout
{reauth-period | quiet-period | tx-period | supp-timeout |
server-timeout}
Mode
Interface Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx