System Utility and Clear Commands
8039_en_01
PHOENIX CONTACT
5-23
ping
Use this command to determine whether another computer is on the network. Ping provides
a synchronous response when initiated from the CLI and Web interfaces.
Using the options described below, you can specify the number and size of Echo Requests
and the interval between Echo Requests.
Example:
The following are examples of the CLI command.
Example:
ping success:
(FL SWITCH GHS Firmware Routing) #ping 10.254.2.160 count 3 interval
1 size 255
Pinging 10.254.2.160 with 255 bytes of data:
Received response for icmp_seq = 0. time= 275268 usec
Received response for icmp_seq = 1. time= 274009 usec
Received response for icmp_seq = 2. time= 279459 usec
----10.254.2.160 PING statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (msec) min/avg/max = 274/279/276
Example:
ping failure:
In Case of Unreachable Destination:
(FL SWITCH GHS Firmware Routing) # ping 192.168.254.222 count 3
Format
logout
Modes
•
Privileged EXEC
•
User EXEC
Default
•
The default count is 1.
•
The default interval is 3 seconds.
•
The default size is 0 bytes.
Format
ping
<ipaddress|hostname>
[count
<count>
] [interval
<interval>
] [size
<size>
]
Modes
•
Privileged EXEC
•
User EXEC
Parameter
Description
count
Use the
count
parameter to specify the number of ping packets (ICMP Echo requests) that are sent to
the destination address specified by the
<ip-address>
field. The range for
<count>
is 1 to 15
requests.
interval
Use the
interval
parameter to specify the time between Echo Requests, in seconds. Range is 1 to
60 seconds.
size
Use the
size
parameter to specify the size, in bytes, of the payload of the Echo Requests sent. Range
is 0 to 65507 bytes.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx