FL SWITCH GHS CLI
2-74
PHOENIX CONTACT
8039_en_01
The IGMP Snooping Querier application supports sending periodic general queries on the
VLAN to solicit membership reports.
no set igmp querier
Use this command to disable IGMP Snooping Querier on the system. Use the optional
address
parameter to reset the querier address to 0.0.0.0.
set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time. It is the amount of time in
seconds that the switch waits before sending another general query.
no set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time to its default value.
set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period. It is the time period that
the switch remains in Non-Querier mode once it has discovered that there is a Multicast
Querier in the network.
Note:
The Querier IP Address assigned for a VLAN takes preference over global configuration.
Default
disabled
Format
set igmp querier [<
vlan-id
>] [address
ipv4_address
]
Mode
•
Global Config
•
VLAN Mode
Format
no set igmp querier [<
vlan-id
>] [address]
Mode
•
Global Config
•
VLAN Mode
Default
disabled
Format
set igmp querier query-interval
<
1-18000
>
Mode
Global Config
Format
no set igmp querier query-interval
Mode
Global Config
Default
60 seconds
Format
set igmp querier timer expiry
<60-300>
Mode
Global Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx