Phoenix Contact FL SWITCH GHS 12G/8, User Manual, Page: 181 / 242

Simple Network Time Protocol (SNTP) Commands
8039_en_01 PHOENIX CONTACT
5-27
no sntp client mode
This command disables Simple Network Time Protocol (SNTP) client mode.
sntp client port
This command sets the SNTP client port id to a value from 1-65535.
no sntp client port
This command resets the SNTP client port back to its default value.
sntp unicast client poll-interval
This command sets the poll interval for SNTP unicast clients in seconds as a power of two
where <poll-interval> can be a value from 6 to 16.
no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value.
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-
30.
Format
no sntp client mode
Mode Global Config
Default 123
Format
sntp client port <portid>
Mode Global Config
Format
no sntp client port
Mode Global Config
Default 6
Format
sntp unicast client poll-interval <poll-interval>
Mode Global Config
Format
no sntp unicast client poll-interval
Mode Global Config
Default 5
Format
sntp unicast client poll-timeout <poll-timeout>
Mode Global Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx