FL SWITCH GHS CLI
6-22
PHOENIX CONTACT
8039_en_01
enter. You must enter the
<username>
in the same case you used when you added the user.
To see the case of the
<username>
, enter the
show users
command.
no users passwd
This command sets the password of an existing user to blank. When you change a password,
a prompt asks for the old password. If there is no password, press enter.
users passwd
<username>
encrypted
<password>
This command allows the administrator to transfer local user passwords between devices
without having to know the passwords. The
<password>
parameter must be exactly 128
hexadecimal characters. The user represented by the
<username>
parameter must be a
pre-existing local user.
users snmpv3 accessmode
This command specifies the snmpv3 access privileges for the specified login user. The valid
accessmode values are
readonly
or
readwrite
. The
<username>
is the login user
name for which the specified access mode applies. The default is
readwrite
for the “admin”
user and
readonly
for all other users. You must enter the
<username>
in the same case
you used when you added the user. To see the case of the
<username>
, enter the
show
users
command.
Note:
To specify a blank password in the configuration script, you must specify it as a space within quotes, for
example, “ ”. For more information about creating configuration scripts, see
“Configuration Scripting Commands”
on page 480
.
Default
no password
Format
users passwd
<username>
Mode
Global Config
Format
no users passwd
<username>
Mode
Global Config
Format
users passwd
<username>
encrypted
<password>
Mode
Global Config
Defaults
•
admin - readwrite
•
other - readonly
Format
users snmpv3 accessmode
<username> {readonly | readwrite}
Mode
Global Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx