Utility Commands
8039_en_01
PHOENIX CONTACT
5-1
S e c t i o n 4 : U t i l i t y C o m m a n d s
This chapter describes the utility commands available in the FL SWITCH GHS Firmware CLI.
D
UAL
I
MAGE
C
OMMANDS
FL SWITCH GHS Firmware software supports a dual image feature that allows the switch to
have two software images in the permanent storage. You can specify which image is the
active image to be loaded in subsequent reboots. This feature allows reduced down-time
when you upgrade or downgrade the software.
delete
This command deletes the supplied image file from the permanent storage. The image to be
deleted must be a backup image. If this image is the active image, or if this image is activated,
an error message displays.
boot system
This command activates the specified image. It will be the active-image for subsequent
reboots and will be loaded by the boot loader. The current active-image is marked as the
backup-image for subsequent reboots.
show bootvar
This command displays the version information and the activation status for the current active
and backup images. The command also displays any text description associated with an
image. This command displays the switch activation status.
Note:
The commands in this chapter are in one of four functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every configuration command,
there is a show command that displays the configuration setting.
•
Copy commands transfer or save configuration and informational files to and from the switch.
•
Clear commands clear some or all of the settings to factory defaults.
Format
delete
{image1 | image2}
Mode
Privileged EXEC
Format
boot system
<image-file-name>
Mode
Privileged EXEC
Format
show bootvar
Mode
Privileged EXEC
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx