LLDP (802.1AB) Commands
8039_en_01
PHOENIX CONTACT
2-83
lldp notification-interval
Use this command to configure how frequently the system sends remote data change
notifications. The
<interval>
parameter is the number of seconds to wait between sending
notifications. The valid interval range is 5-3600 seconds.
no lldp notification-interval
Use this command to return the notification interval to the default value.
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information.
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including MED-
related information.
show lldp
Use this command to display a summary of the current LLDP configuration.
Default
5
Format
lldp notification-interval
<interval>
Mode
Global Config
Format
no lldp notification-interval
Mode
Global Config
Format
clear lldp statistics
Mode
Privileged Exec
Format
clear lldp remote-data
Mode
Global Config
Format
show lldp
Mode
Privileged Exec
Term
Definition
Transmit Interval
How frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold
Multiplier
The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
Re-initialization
Delay
The delay before re-initialization, in seconds.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx