P
AGE
49
1127179,
V
ER
.
02
D
REAM
S
TATION
B
I
PAP
S/T
AND
AVAPS
S
ERVICE
&
T
ECHNICAL
R
EFERENCE
M
ANUAL
Cellular Modem
The DreamStation Cellular Modem is designed for use with select Philips Respironics therapy devices. Once
installed, it automatically transfers data between the therapy device and Philips Respironics proprietary com-
pliance software. The cellular modem is able to receive oximetry data and transfer it to the therapy device.
Wi-Fi Accessory
Wi-Fi accessory is designed for use with select Philips Respironics therapy devices. Once installed and con-
nected to a local Wi-Fi network it can transfer data between the therapy device and Philips Respironics propri-
etary compliance software. If available on your model, the accessory is able to receive oximetry data and
transfer it to the therapy device.
Link Module
The Link Module is able to receive oximetry data and transfer it to the therapy device for home use or in a la-
boratory setting. For use in a laboratory setting, the Link Module also includes an RS-232 (or “DB9”) port to
allow remote control of the DreamStation BiPAP autoSV device by a personal computer.
Oximeter
The DreamStation oximetry system, when part of the DreamStation BiPAP autoSV device, measures and dis-
plays %SpO
2
and heart rate in adult patients.
WARNING
Use only Philips Respironics recommended SpO2 cables and pulse oximeter sensors. Use of
incompatible sensors can result in inaccurate pulse oximeter performance.
5.20 Updating the Software Using the SD Card
You can update the device software using the SD card. The software update must be done when the therapy
is off.
1. Insert an SD card with the new software version into the device. A pop-up screen appears asking
“Would you like to upgrade software?”
2. Turn the control dial to select
Yes
and then press the control dial to start the upgrade. The busy
icon appears while the upgrade is in progress. Do not remove power from the device.
3. If the software update is successful, the Change Accepted icon appears on the screen. Removed
the SD card from the device to restart the device and use the new software.
4. If an SD card error is detected, the Change Rejected icon appears . Remove the SD card and
reinsert. If the alert continues to occur, try a new SD card.
