P
AGE
114
1127179,
V
ER
.
02
D
REAM
S
TATION
B
I
PAP
S/T
AND
AVAPS
S
ERVICE
&
T
ECHNICAL
R
EFERENCE
M
ANUAL
7.3 Creating the Serial/Model Number Label
In the case that the Bottom Enclosure of the PAP device or Bottom Cover of the Humidifier is replaced during
service, or if there is damage to the labels, all information on the serial/model number labels is required to be
duplicated in order to maintain proper traceability. Refer below for details on reprinting the labels.
NOTE
The new label MUST include the same Model Number, Serial Number and
UDI number as those of which are on the original label.
Example Label
Equipment (Printer)
Recommended Equipment:
Zebra GX430T or similar
Printer Specifications:
•
Label printer
•
Monochrome
•
Direct thermal/thermal transfer
•
Roll (4.25 in)
•
300 dpi
•
up to 240.9 inch/min
•
USB
•
LAN
•
serial