P
AGE
121
1127179,
V
ER
.
02
D
REAM
S
TATION
B
I
PAP
S/T
AND
AVAPS
S
ERVICE
&
T
ECHNICAL
R
EFERENCE
M
ANUAL
To Install the Dry Box Assembly:
1. Position the Dry Box into the Bottom Assembly.
2. Snap the Dry Box into place and verify it is fully seated.
3. Assemble the remainder of the device as instructed in the previous sections.
Replacing the Wire Guard
Kit
Included in Kit
Tools Required
Wire Guard
•
Wire Guard
•
Flathead Screwdriver
To remove the Wire Guard:
1. Remove the Water Tank and Flip Lid Seal (refer to previous corresponding sections).
2. Push the bottom of the Wire Guard down and inward toward the Flip Lid while prying upward with a
small flathead screwdriver.
3. Pull the Wire Guard away from the Flip Lid.
Wire Guard
Push at base of
Wire Guard and pry
upward to remove
