P
AGE
25
1127179,
V
ER
.
02
D
REAM
S
TATION
B
I
PAP
S/T
AND
AVAPS
S
ERVICE
&
T
ECHNICAL
R
EFERENCE
M
ANUAL
5.10 Starting the Device
1. Ensure power is supplied to the device. The first screen to display will be the Philips Respironics logo,
followed by the device model screen, and then the Home screen.
The first time the device is powered on, a pop-up will prompt you to set the time on the device. The default
setting is Greenwich Mean Time, but you may adjust the time in 30 minute increments to match your local
time zone. If you choose to skip this initial time setting, the time can always be adjusted under the “My Setup”
menu.
Note:
This time setting is not displayed as a clock function on the device. It is only used to align therapy data
for Provider’s data reports.
2. Press the Therapy button on top of the device to turn on airflow and begin therapy. The current
delivered pressure will display on the screen.
3. Make sure that no air is leaking from the system.
4.
Press the Therapy button for 2 seconds to turn off therapy.
NOTE
During therapy, it there is a mains interruption (i.e. power loss) the device will
return to the Home screen once power is restored. You may resume therapy
as needed.
