Paradyne ACCULINK 316x, Operator'S Manual

Page: 72 / 211

ACCULINK 316x DSU/CSU
3-30 December 1996 3160-A2-GB22-10
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
function key. Use the scroll keys, if necessary.
F1
Load from:
Activ
Cust Fact1
F2 F3
3. Press F1 to select Edit.
F1
Choose Funct:
Edit
Save
F2 F3
4. Press the key from the Edit screen to display
the SNMP selection.
F1
Edit:
DTE
Port NET
F2
F3
5. Press F3 to select SNMP.
F1
Edit:
User
Alarm SNMP
F2
F3
6. Press F1 to select Gen from the SNMP Config
screen.
F1
SNMP Config:
Gen
Trap
F2 F3
7. Press the F1 (Next) key until the
CommunityName1 configuration option appears.
F1
System Name:
Next
Edit Clear
F2 F3
8. Press F2 (Edit) to edit the community name. The
factory default community name is public.
F1
CommunityName1:
Next
Edit Clear
F2 F3
NOTE
Steps 9 and 10 describe the
process for entering text strings
for SNMP configuration options.
This process applies to entering
any text strings into SNMP
configuration options.
9. Use the and keys to position the cursor
under the character you want to change. Press F1
(Up) or F2 (Down) to scroll through the valid
numbers/characters for the text string. The valid
characters consist of the set of printable ASCII
characters. The F1 (Up) key scrolls through the
ASCII character set in the following order:
numbers (0–9), lowercase letters (a–z), uppercase
letters (A–Z), space character, ASCII symbols
(ascending order, based on ASCII code), and the
End of Line symbol (
←
). The
←
erases all
characters to the right of the cursor.
F1
public
Up
Down Save
F2 F3