Paradyne ACCULINK 316x, Operator'S Manual

Page: 21 / 211

Introduction
1-7 3160-A2-GB22-10 December 1996
Table 1-1
Models 3160/3164 DSU/CSUs Rear Panel Connectors
Connector Name Function
POWER A modular connector that supplies power to the DSU/CSU.
AUX PORT An auxiliary communications port for future use.
COM PORT A communications port that provides access to the front panel from a locally
connected PC. The port can also be used to connect a terminal for an async
terminal interface, an ASCII terminal or printer for reporting alarm messages, or to
support an SNMP management link. The connector is an 8-pin, keyed modular jack.
MODEM An RJ11 connector for a 2-wire VF line used to connect the integral modem.
Provides access to the front panel from a remotely connected PC. The port can also
be used to connect a remote terminal for an async terminal interface or an ASCII
terminal or printer for reporting alarm messages, or to support an SNMP
management link.
DTE (DSX-1) A DB15 socket, screw-type connector for DTE equipment.
NETWORK An RJ48C, unkeyed modular jack that provides connection to the T1 network.
CLOCK IN A connector used to attach an external clock to the DSU/CSU.
PORT 1— 4 A DB25 (EIA 530A) connector used to connect the customer’s synchronous data
DTE.