Panasonic Electric Works Nordic AB
MEW01351
Rev: -
Planning Instructions Fire alarm system EBL512 G3, V1.1.x
112
In the dialog box for any alarm point (e.g. a detector/sensor)
109
, there
is a "Text" field where the alarm text for that alarm point can be typed
(or edited). The alarm text will be shown in the c.i.e. display when
this alarm point has activated fire alarm.
Text editor
The alarm text can, as an alternative, be typed (or edited) in the
WinG3 "Text editor" (menu System | Edit Alarm Texts…).
No matter where the text is typed, it will be shown on both places.
Explanations:
Zone-Address
column
Shows the already programmed alarm points (e.g. 001-01, 001-02,
002-01 etc.).
Only the texts have to be typed / edited in the "Text" column.
Shows the already programmed zones, i.e. I/O unit 3361 zone line
inputs programmed with address "00" (i.e. ZZZ –
00)
and 8 zones
expansion board 4580 zone line inputs.
Only the texts have to be typed / edited in the "Text" column.
Text
column
Shows already programmed alarm texts. Texts can be typed / edited
here.
109
In WinG3.
Alarm text
