Oracle Sun Server X4-4 Service Manual Download

Page: 97 / 292

Powering Off the server

Preparing to Service the Server

Remove the top cover. See

“Remove the Server Cover” on page 107

Powering Off the server

Powering off involves powering down the server from full power mode to standby power

mode. You can power down the server to standby power mode

locally

remotely

. To power off

locally, use the front panel Power button. To power off remotely, use the server OS shutdown

procedure or Oracle ILOM.

This section contains information and procedures related to power modes and power off

options, including complete power removal:

■

“Power Off, Graceful (Power Button)” on page 97

■

“Power Off, Immediate (Power Button)” on page 98

■

“Power Off, Remote (Oracle ILOM CLI)” on page 100

■

“Power Off, Remote (Oracle ILOM Web Interface)” on page 101

■

“Remove Power” on page 102

■

“Power Modes, Shutdowns, and Resets” on page 103

Power Off the Server Using the Server OS

If the server OS is running, you can use the OS shutdown procedure to power off the server to

standby power mode. The OS shutdown procedure provides a graceful shutdown of the server.

To power off the server, use the OS-specific shutdown procedure.

Next Steps

■

“Performing Electrostatic Discharge and Static Prevention Measures” on page 74

■

“Power Modes, Shutdowns, and Resets” on page 103

Power Off, Graceful (Power Button)

Note -

This procedure is performed locally and requires access to the server front panel.

Powering off the server by pressing the front panel Power button causes operating systems

with Advanced Configuration and Power Interface (ACPI) to perform an orderly shutdown of

Summary of Contents for Sun Server X4-4





































































































































































































































































































Search results

Summary of Contents for Sun Server X4-4

Reviews:

Related manuals for Sun Server X4-4

Brands by name

Popular brands

Oracle Sun Server X4-4, Service Manual

Search results

Summary of Contents for Sun Server X4-4

Reviews:

Related manuals for Sun Server X4-4

Brands by name

Popular brands