![background image](http://html.mh-extra.com/html/omron/zx-e/zx-e_operation-manual_1633397058.webp)
56
Se
c
tion 3
Adjus
ting Line
a
rity
ZX-E
Operation Manual
Section 3
BASIC OPERATION
Entering Adjustment Values
Set the sensing object at the positions for 0%, 50%, and 100% of the rated measure-
ment distance and register those measured values as the adjustment values.
Measurement distance, p. 143
Perform the registration in order, starting with 0%, then 50% and 100% of the measure-
ment distance.
To simply replace the sensing object material and use the default linearity adjustment, skip this oper-
ation and perform
Executing Adjustment.
Entering Adjustment Value for 0% Position
1.
Set the sensing object at the 0% position.
2.
Use the LEFT and RIGHT Keys to display
D000.
3.
Press the ENT Key.
The sub-display will show OK
and the adjustment value
will be registered.
Press the ENT Key again to reinput the adjust-
ment value.
Rated measurement distance
0%
50%
100%
0%
Rated measure-
ment distance
Z166-E1-02A.book Page 56 Friday, June 3, 2005 4:18 PM
Summary of Contents for ZX-E -
