CONDOR
®
T-RAMP
TM
QUICK START MANUAL
STOP! WARNING: READ THIS FIRST!
It is recommended that detaching the T-Ramp from its shipping skid be performed by at least two (2) able-bodied adults
.
First Read and Understand the Instruction manual and product labels for important safety, set-up and troubleshooting information. If you have problems setting up or
using the Condor® T-Ramp
TM
, contact customer service @ 1-815-754-7418 or contact us via e-mail @ www.condor-lift.com. Condor® T-Ramp
TM
is not intended for
use by children.
Skid Detachment Instructions
:
Remove all parts from shipping box. Check the parts below to make sure you have all the parts needed to remove and operate your Condor® T-Ramp
TM
before
beginning. In the unlikely event that you find a part damaged or missing, please call customer service @ #815-754-7418
.
-
7-Way T-Ramp power cord
-
Wireless Remote
-
Fuse / Hardware bag
-
Operation Manual – Refer to Manual for details
-
3/4” wrench or socket (Not Included)
-
9/16” wrench or socket (Not Included)
-
Metal band cutters (Not Included)
-
Vehicle with Class III or better hitch receiver assembly (Not Included)
1. Place skid behind truck with wheels closest to truck.
Remove and open included shipping box.
2. Remove axle / wheel assemblies by cutting steel bands.
3. (a) Install axle / wheel assemblies in storage position
(See Section 4.4), (b) Remove Kickstand from shipping
skid.
4. Attach and Secure Kickstand (See Section 4.3 – 4.5)
5. Release one (1) tie down strap (a). Using a 9/16” wrench,
remove the Mechanism Hold-Down Bracket (b). While holding
the second tie down strap, release second tie down strap (c).
Continue holding the tie down strap to be sure entire unit
remains in the balanced, upright position.
