![background image](http://html.mh-extra.com/html/omron/zx-e/zx-e_operation-manual_1633397106.webp)
104
S
e
c
tion 5
Line
a
r Outp
ut
ZX-E
Operation Manual
Section 5
DETAILED SETTINGS
This section describes how to set the output range, using an example of current output
with a range with the following conversions: 0.2 mm to 4 mA and 0.8 mm to 20 mA.
Change the values in the example to suit a voltage output as necessary.
1.
Turn OFF the power supply to the Amplifier Unit.
2.
Move the current/voltage switch to current out-
put. The switch is found on the bottom of the
Amplifier Unit.
Moving to FUN Mode and SPCL
3.
Turn ON the power supply and move the
mode switch to FUN.
4.
Use the LEFT and RIGHT Keys to display
SPCL on the main display.
Moving to FOCUS
5.
Press the UP or DOWN Key.
The sub-display will flash.
6.
Use the Up and DOWN Keys to display SET
or ALL.
7.
Press the ENT Key.
Measured
value (mm)
Output current (mA)
Measured
value (mm)
Output current (mA)
Voltage output
Current output
Z166-E1-02A.book Page 104 Friday, June 3, 2005 4:18 PM
Summary of Contents for ZX-E -
