![background image](http://html.mh-extra.com/html/omron/zx-e/zx-e_operation-manual_1633397131.webp)
129
ZX-E
Operation Manual
S
ect
io
n
6
Us
ing th
e
Ze
ro
Re
s
e
t Func
tion
Section 6
AUXILIARY FUNCTIONS
Executing Zero Reset
When the zero reset function is used, the measured value can be reset to a reference
value of 0 when the ENT key is pressed or an external signal is input.
If zero reset has already been executed, that value will be overwritten. The settings are
saved even if the power is turned OFF (default). This memory setting can be changed
so that the zero reset settings are not saved when the power is turned OFF.
Zero reset memory, p. 130
Linear Output
The measured value when zero reset is executed will be the center value in the linear output range.
When monitor focus is set, the measured value will be the center value between the two points set
for monitor focus.
Output Settings (Monitor Focus), p. 103
The minimum display value is
−
19,999 and the maximum is 59,999. If the measurement result after
zero reset is less than the minimum, the display will be
−
19,999. If the measurement result is greater
than the maximum, the display will be 59,999. Zero reset can be executed only when the measured
value is
±
10% of the rated measurement distance.
1.
Place the reference sensing object in position.
2.
Set the mode switch to RUN.
3.
Press the ENT Key for more than one second
or input the zero reset signal from an external
device (for 800 ms max.).
The reference value will be registered and the zero reset
indicator will be lit. The tolerance for the registered refer-
ence value will be displayed on the main display.
Before Zero Reset
Measured value (mm)
Output current (mA)
Output voltage (V)
Output current (mA)
Output voltage (V)
After Zero Reset
Measured value (mm)
Example
Zero reset executed
at 0.2 mm
Z166-E1-02A.book Page 129 Friday, June 3, 2005 4:18 PM
Summary of Contents for ZX-E -
