![background image](http://html1.mh-extra.com/html/omron/v530-r160e/v530-r160e_user-manual_741447184.webp)
182
SECTION
7
Selec
ting t
he Cond
itions f
or Image Storage (Im
age Storing)
V530-R160
Operation Manual
SECTION 7
System Settings
Selecting the Conditions for Image Storage (Image
Storing)
A function for saving read images regardless of the selected scene is provided. You can determine the
cause of a reading error from the saved image, then adjust the reading conditions and check the result
by reading the same image again. Images can be automatically backed up in a Memory Card.
The read data currently displayed on the monitor can also be captured and saved in the Memory Card.
The asterisk (*) indicates the default setting.
1.
Go into
SYS
(system) mode and select
Image storing
.
Refer to page 180.
The screen for setting the method of image storage
will be displayed.
2.
Make the settings for each item.
3.
Select
End
.
Menu item
Details
Storing condition
Select whether or not images read by the controller are saved.
(OFF, Only NG*, All)
Refer to page 183.
Store to MemCard
Select whether or not images specified by the Storage condi-
tion are automatically backed up in the Memory Card. (OFF*,
ON)
Refer to page 184.
Number of Images
Set the maximum volume of image data that can be backed up
in the Memory Card. When this figure is exceeded, the stor-
age count is cleared and the existing images are overwritten.
(Range: 100* to 1000)
Capture display
Select whether or not the currently displayed content of the
monitor screen is to be captured.
(OFF*, ON)
Refer to page 185.