141
V530-R160
Operation Manual
SECTION
5
Set
ting Rea
din
g Co
nditions
(Q
RCode
)
SECTION 5
Setting Reading Conditions
Reading Settings
Set the conditions for reading QRCode.
Set whether the controller automatically selects a pattern when reading is executed, the timeout
time for reading, and the number of retries executed in the event of an NG reading result.
The details of the setting method are the same as those described for
Read DataMatrix
.
Refer to page 112.
Display Settings
Set the contents displayed in
MON
(monitor) mode and
RUN
mode.
Select whether or not the guidance displayed at the bottom of the monitor screen is displayed,
and whether or not reading data is displayed.
If you increase the number of monitor display items, processing time increases proportionately.
The details of the setting method are the same as those described for
Read DataMatrix
.
Refer to page 114.
Trend Monitor Settings
Up to 1000 events showing the transition over time of the “pattern correlation value” or “contrast
between the code and background” can be displayed in graph form. Changes in the shape of the
code and the trend in changes in the lighting status can be checked by monitoring. This helps
prevent multiple occurrences of defective items, and the analyze the cause when NG results
occur.
The details of the setting method are the same as those described for
Read DataMatrix
.
Refer to page 119.
