39
V530-R160
Operation Manual
SE
C
T
IO
N
2
M
ount
in
g the
Con
tro
ller
SECTION 2
Installation and Connections
Mounting the Controller
There are four ways to mount the Controller: “DIN Track mounting”, “rear surface-mounting”, “side
surface-mounting”, or “bottom surface-mounting”.
DIN Track Mounting
The 2-Dimensional Code Reader can be easily mounted to or removed from 35-mm DIN Track.
Mounting the Controller
Hook the V530-R160 into the DIN Track as shown in the diagram and then press in at the bottom
until the V530-R160 locks into place.
Removing the Controller
Use a screwdriver to pull the hook down and then pull out the V530-R160 from the bottom.
PFP-M End Plate
(OMRON)
DIN Track (OMRON)
PFP-100N (1 m)
PFP-50N (50 cm)
PFP-100N2 (1 m)
TRIG-A
ALARM
TRIG-A
ALARM
