manualshive.com logo in svg

Omron V530-R160E, User Manual

Share
Download
Omron V530-R160E User Manual Download Page 261

259

V530-R160

Operation Manual

SECTION 

9

Erro

r M
ess
age

s

 and
 Cor

res

ponding

 Corr

ect
ive 

Act
io

n

s

SE
CTION 

9

SECTION 9

Troubleshooting

* : The ERR signal only turns ON when an error occurs in the 

MON

 mode or the 

RUN

 mode.

Error message

Countermeasures

Cannot delete directory having files.

Delete the files in the directory to be deleted or move 
the files to another directory.

(Reason)
Only empty directories can be deleted.

p.171

Directory name is not specified.

Specify the directory name and press the 

ENT

 Key.

Directory name contains unusable 
character.

Check the directory name. The following characters 
cannot be used: ¥ / , : ; * ? “ < > | & .

−

Same directory name has already 
existed.

Specify a directory name that is not being used.

−

Same file name has already existed.

Specify a file name that is not being used.

−

Date/time settings error.

Set the correct data and time.

(Reason)
A date not in the calendar or an invalid time has been 
input.

p.188

File name is not specified.

Specify the file name and then press the 

ENT

 Key.

−

File name contains unusable charac-
ter.

Check the directory name. The following characters 
cannot be used: ¥ / , : ; * ? “ < > | & .

−

Memory card access error

*

• The recommended Memory Card has not been 

inserted.

• Use another Memory Card.
• The Memory Card has not been formatted.

p.51

Memory card is not inserted

*

Insert the recommended Memory Card.

p.51

Summary of Contents for V530-R160E







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands