Omron V530-R160E, User Manual

Page: 232 / 294

230
SECTION
8
Se
rial Int
erf
ac
e
(Nor
ma
l)
V530-R160
Operation Manual
SECTION 8
Communication with the Host
 Settings at the Programmable Controller
• Turn OFF DIP switch 5 of CQM1H.
• Set the communications conditions.
Set DM6645 to
1001 , DM6646 to 0904 , DM6648 to 1000 and DM6649 to 0D00 .
Refer to the operation manual for CQM1H for the ways to change the setting.
• Set the read command.
Set DM0100 to
4047 and DM0100 to 4C00 .
 Settings at the Controller
Make the following communication settings.
Item Setting
Communications method Normal
Baud rate 9600 bps
Data length 7 bit
Parity bits EVEN
Stop bits 2 bit
Header None
Footer CR
Item Setting
Baud rate
The same settings as those of
the Programmable Controller.
Data length
Parity bits
Stop bits
Header
Footer
FCS OFF
Mode Normal