manualshive.com logo in svg

Omron V530-R160E, User Manual

Share
Download
Omron V530-R160E User Manual Download Page 176

174

SE
CTION 

6

Che

cking 

I/O 
Stat

us
 wit

h

 Host

 Dev

ices
 (

I/O M

onitor

)

V530-R160

Operation Manual

SECTION 6
Other Functions

The interface selections will be displayed.

5.

Select 

Serial

.

The 

Serial

 

I/O monitor 

screen will be displayed.

Display Details

6.

Press the 

ESC

 Key to leave this screen.

The screen in 

5. 

will return.

Display

Meaning

SO

Output to host device.
Press the 

TRIG

 Key once to send a test character string 

“TEST STRING”

 from 

the V530-R160 to the host device. The contents of the test character string can 
be changed.

 Refer to page 175.

SI

Input from host device. If more than 26 characters are received, only the first 
26 characters will be displayed.
If Echo back is set to ON, the received data will be returned as is to the host 
device.

 Refer to page 175.

Summary of Contents for V530-R160E







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands