114
SECTION
5
Set
ting
Rea
d
ing Co
nditions
(Dat
aMa
trix
)
V530-R160
Operation Manual
SECTION 5
Setting Reading Conditions
Display Settings
Set the contents displayed in
MON
(monitor) mode and
RUN
mode.
If you increase the number of monitor display items, processing time increases proportionately.
1.
Select
1.
Read DataMatrix.
The initial screen for the DataMatrix reading will be
displayed.
2.
Select
Display settings
.
Set whether or not guidance is displayed at the
bottom of the screen. (ON*, OFF)
Refer to page 116.
Specifies whether or not to display reading data
on the screen. (ON*, OFF)
Refer to page 116.
Specifies whether or not to display the code's
detailed data on the screen. (ON*, OFF)
Refer to page 116.
Set whether or not the position of the finder pat-
tern and cell erroneous recognition positions
are to be displayed. (ON*, OFF)
Refer to page 118.
Specifies the font size that will be used when
reading data is displayed on the screen.
(Standard,
×
4 *)
The asterisk (*) indicates the default setting.
