background image

184

SECTION 

7

Selec

ting t
he Cond

itions f

or Image Storage (Im

age Storing)

V530-R160

Operation Manual

SECTION 7
System Settings

On reading after setting the image storage condition (

Only NG

/

All

), images are saved in sequence

from 

memory 0

.  When the scene is switched and reading of that scene starts, the existing data is

overwritten starting from 

memory 0

.

If reading conditions are set for a scene that has not been set, the camera image is saved in 

mem-

ory 0

.

Storage in Memory Cards

When this function is turned ON, images that comply with the image storage conditions are auto-
matically backed up in the Memory Card.
By checking the date and time that the file was created, you can determine when a reading NG
event occurred.
By using NG images backed up in the Memory Card for pattern registration, you can improve the
reading conditions.
A directory entitled “save” is automatically created in the root directory of the Memory Card.
Image data is backed up in this directory.

The number of files that can be backed up differs according to the capacity of the Memory Card.
Use the following information as a guide.

When 

Store to MemCard

 is set to ON, the processing time is increased by approximately 2 sec-

onds due to the image backup operation.

Image data is backed up under file
names of the type indicated below.

Judgment Result
(OK or NG)

Five-digit serial numbers
starting from “00000”

OK00001.bmp

Memory Card capacity

Number of saved files

64 MB

Up to 200

128 MB

Up to 400

Summary of Contents for V530-R160E







































































































































































































































































































Reviews: