34
Basic Operations Using the DIP Switch
Section 4-2
4-2-4
STEP 4: Starting Reading
Reading can now be started and the reading result will be output to
the external device though the RS-232C port.
1,2,3...
1.
Confirm that the RUN indicator (orange) is lit.
2.
Press the Trigger Switch on the Scanner to read a code. If reading
is successful, the OK indicator (green) will light and the buzzer will
sound.
Note
1.
Hold down the Trigger Switch until the reading is completed.
2.
Repeat the teaching operation if reading cannot be completed
successfully.
3.
With the V530-H301 Scanner, hold the Scanner as close to the
workpiece as possible.
Trigger Switch
