115
Tool Mode
Section 5-4
Note
Never turn OFF the power when processing messages for saving
or loading operations are displayed. Data may be lost, and the
V530-C300E may not operate properly the next time it is started.
Saving Data to a Personal Computer (V530-C300E
Personal Computer)
Procedure
1,2,3...
1.
Connect the COM1 port on the computer and the V530-C300E
using an RS-232 cable.
2.
Make the V530-C300E communication settings.
The default communication settings are as shown in the following
table. These settings can be normally used.
3.
Start the Hyper Terminal program on the computer and make the
following communication settings.
The same communication settings must be used on both the
V530-C300E and the modem on the computer.
4.
Save data from the V530-C300E.
Item
Setting
Baud rate
38400 (bps)
Data length
8 (bit)
Parity bits
None
Stop bits
1 (bit)
Footer
CR
Item
Setting
Baud rate (B)
38400 (bps)
Data length (D)
8 (bit)
Parity bits
None
Stop bits
1 (bit)
Flow control
None (XMODEM protocol is used.)
