Omron V530-C300E Operation Manual Download Page 13

Page: 13 / 205

xiii

Installation Precautions

• Provide a forced-air fan or air conditioning if the ambient temper-

ature of the Controller might exceed 50

Noise Resistance

Use the following measures to help increase noise resistance.

• Do not install V530-C300E components in a cabinet containing

high-voltage equipment.

• Do not install V530-C300E components within 200 mm of power

cables.

Cables

• Always turn OFF the power before connecting or disconnecting

cables.

• Do not remove the core connected to the Scanner Cable (V530-

W001).

• Do not lay cables with power cables to reduce the possibility of

noise affecting operation.

• Install cables well away from motors, arc welders, electromag-

netic switches, and other possible sources of noise.

• Lay cables so that they are not repetitively bent at the cable con-

nector.

Control Box

V530-C300E

Louver

V530-C300E

200mm min.

Power Cable

Summary of Contents for V530-C300E














































































































































































































Search results

Summary of Contents for V530-C300E

Reviews:

Related manuals for V530-C300E

Brands by name

Popular brands

Omron V530-C300E, Operation Manual

Search results

Summary of Contents for V530-C300E

Reviews:

Related manuals for V530-C300E

Brands by name

Popular brands