xv
Package Contents
4
Installing the Video Monitor
This precaution applies to using the recommended Video Monitor
(F150-M09). The case of the Video Monitor is connected to the 0-V
line of the internal circuits. Observe the following precautions to pre-
vent noise penetration if the case is made of metal.
• Do not ground the Video Monitor.
• Do not ground the metal portion of the connector.
• If the Video Monitor is installed on a metal surface, secure it with
plastic.
2-Dimensional Code
• The blank margin (quiet zone) is necessary around 2-dimen-
sional codes. Four cells are required for Data Matrix and QR
Code.
• Set the code size so that only one code is picked up. Reading
cannot be performed correctly if more than one code is on the
screen.
Regulations and Standards
The V530-C300E complies with the EC Directive and EN standards
listed below.
• EC Directive
EMC Directive: No. 89/336/EEC
• EN Standards (European Standards)
EN61326: 1997/Annex A+A1: 1998 (EMI: Class A),
EN61000-6-2: 1999, EN50081-2: 1993
4
Package Contents
Confirming Package Contents
Check the contents of the package as soon as you receive the V530-
C300E.
Contact the nearest OMRON representative if any of the following
items are missing.
• V530-C300E 2-Dimensional Code Reader Controller
• Operation Manual (this manual)
