57
SET (Setting) Mode
Section 5-1
4.
Press the ESC Key once to return to window shown in step 1.
5.
Press the ESC Key once more to go into RUN mode.
6.
Press the Trigger Switch on the Scanner to perform reading.
If reading is successful, the OK indicator will light and the buzzer
will sound. Parameters will be automatically set based on the
reading data. If the reading is performed successfully, the teach-
ing function will automatically turn OFF. To redo the settings, go
to SET mode and repeat the procedure from step 1.
--- ---ms
Through
RUN
Trigger Switch
