90
SET (Setting) Mode
Section 5-1
Procedure
1,2,3...
1.
Select 2.Image Analysis.
2.
Select Measure Length.
3.
Move the cross cursor to the beginning point using Up/Down/Left/
Right Keys and press the ENT Key.
Press the SHIFT Key at the same time to move faster.
4.
Specify the end point in the same way.
The length of the straight line is measured.
5.
Press the ESC Key to leave this screen.
1. Read DM (Normal)
2. Image Analysis
0. Image Adjust
Analyse input image.
Image Magnifier
Display Pixel Value
Measure Length
Hardware Check
Contrast (Line Bright)
Contrast (Region)
