83
SET (Setting) Mode
Section 5-1
1,2,3...
1.
Select the color of symbol.
2.
Select whether Right & Left Reverse of QR Codes is necessary.
3.
Change the pixel skipping parameters used to search for a model.
(Setting range: 1 to 20; default setting: 4)
The processing time can be reduced if the pixel skipping param-
eters are set to larger values. However, depending on the image,
the search may not be performed since the accuracy is reduced.
After changing the setting, perform a search to confirm whether
the search can be performed correctly.
4.
Set the correlation threshold value for detecting finder patterns.
Locations with correlation values higher than the threshold are
detected. (Setting range: 1 to 100; default setting: 30)
5.
Set the version information for the QR Code to be read. (1 to 6)
The version specified when the model was registered will be dis-
played. (Default setting: Version 1)
Note
If the wrong version information is set, the reading can not be per-
formed correctly.
6.
Select the timeout time for decoding one reading. (Setting range:
200 to 2,000 ms; default setting: 500 ms)
Black
(Default set-
ting)
White
ON
For reading an image after reflection, or through the
back of a transparent material, such as glass.
OFF
(Default setting)
For normal reading (from the front of the object)
Black symbol printed on white base.
White symbol printed on black
base.
Pixel Skipping X
Pixel Skipping Y
Set the number of pixels
skipped when searching.
