36
Basic Operations Using the Console
Section 4-3
Screen Displays
Mode (*1)
4-3-1
STEP 1: Starting
Procedure
1,2,3...
1.
Be sure that the basic components have been connected correct-
ly. page 10
2.
Turn ON the power supply to the monitor.
3.
Turn ON the power supply to the V530-C300E.
Scene No.
The current scene number is given.
2 different reading conditions can be set.
Mode (*1)
The current mode is displayed.
Cursor
Move the Up, Down, Left and Right Keys to the desired setting.
Freeze (0)
--- --- ms
Scn 0
RUN
Displayed Image
The type of image currently
displayed on the screen is
indicated. Set to through
image to check whether the
image is being displayed
properly.
→
page 103
Freeze (0)
SHIFT
+
Through
SHIFT
+
Mode
Description
SET (Set)
Used to set reading conditions.
RUN (Run)
Used to read codes. The judgment is output to external devices through
RS-232C.
SYS (System)
Used to set system conditions such as communications specifications.
TOOL (Tool)
Used to save and load settings for the system or scenes or image data
through the RS-232C port connected to an external device.
SAVE (Save)
Used to save setting data to flash memory. Be sure to save and turn OFF
power to the V530-C300E after changing the settings.
