27
Timing Charts
Section 3-7
OK Result Obtained after Repeated Reading
Note
1.
The output time to RS-232C changes depending on the data vol-
ume or baud rate.
2.
The OK indicator will turn OFF when the next trigger is input or a
through image is displayed.
NG Result after Repeated Reading
Note
1.
The output time to RS-232C changes depending on the data vol-
ume or baud rate.
2.
The OK indicator will turn OFF when the next trigger is input or a
through image is displayed.
3.
Error outputs can be enabled or disabled via a setting. The default
is “OFF” (disabled).
Trigger switch:
TRIG terminal
OFF
ON
Not lit
Lit
RS-232C
OK indicator
Read executed. Read executed.
Result: OK
NG
OK
Trigger switch:
TRIG terminal
OFF
ON
Not lit
Lit
RS-232C
OK indicator
Read executed. Read executed.
Result: NG
Read executed.
Error
code
NG
NG
NG
