37
Basic Operations Using the Console
Section 4-3
A startup message appears followed by a processing message.
After a short pause, the initial screen appears. The following
screen appears the first time power is turned ON.
4-3-2
STEP 2: Setting Reading Conditions
Note
This section only describes the necessary functions for basic
operations. Other functions are described in SECTION 5 Opera-
tion with the Console Functions and Operations. Refer to page
45.
Procedure
1,2,3...
1.
Move the cursor to RUN (Run) using the Right Key and press the
ENT Key.
The mode selections are displayed.
RUN
SET
---
RUN
SYS
TOOL
SAVE
RUN
RUN
