31
Basic Operations Using the DIP Switch
Section 4-2
4-2
Basic Operations Using the DIP Switch
4-2-1
STEP 1: Starting
Procedure
1,2,3...
1.
Be sure that the basic V530-C300E components have been con-
nected correctly. page 10
2.
Turn ON the power supply to the V530-C300E.
The RUN indicator will light.
!Caution
Do not turn OFF the power supply for 30 seconds after turning
ON the power supply. Data in memory may be destroyed, possi-
bly preventing correct operation in the future.
Note
The buzzer on the Scanner may sound or the OK indicator or illu-
mination may light for 30 seconds after power is turned back ON,
but this does not indicate a malfunction.
4-2-2
STEP 2: Setting Reading Conditions
The DIP switch on the Controller is set according to the code being
read.
DIP Switch Settings
SW1
24VDC
PWR
RUN
ERR
RS-232C
SCANNER
MONITOR
CONSOLE
2D CODE READER
V530-C300
1
2
3
4
5
6
O
N
TRIG
1
2
3
4
5
6
O
N
SW1
SW2
SW3
SW4
SW5
SW6
SW1: Turn ON to perform
teaching.
SW2: Switches the code between
QR and data matrix.
SW3 to SW6:
Set specifics for the code
being read.
QR Code:
SW3 sets the symbol color.
(SW4 to SW6 are not used.)
Data Matrix:
Set the matrix size.
ON
OFF
Teaching enabled.
Teaching disabled.
