Letter
Name
Function
(A)
Marker attachment loca-
tion
The locations where markers are attached. The markers made by OMRON
are installed for the factory setting. Commercially available markers can also
be installed.
Refer to
(B)
NX bus connector
This is the NX-series bus connector.
(C)
Unit hookup guides
These guides are used to connect two Units.
(D)
DIN Track mounting
hook
This hook is used to mount the NX Unit to a DIN Track.
(E)
Protrusions for removing
the Unit
The protrusions to hold when removing the Unit.
(F)
Indicators
The indicators show the current operating status of the Safety Output Unit or
signal I/O status.
Refer to
(G)
Terminal block
The terminal block is used to connect external devices.
(H)
Unit specifications
The specifications of the Safety Output Unit are given.
Terminal Blocks
There are two models of screwless clamping terminal blocks: NX-TB
£££
2 and NX-TB
£££
1. The
following models of Terminal Blocks can be mounted to Safety Output Units.
NX-TB
£££
2
8-terminal type
(A)
A1
A2
A3
A4
A5
A6
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
(B)
(C)
NX-TB
£££
1
2 Specifications
2 - 36
NX-series Safety Control Unit User's Manual (Z930)
Summary of Contents for NX-SIH400
