manualshive.com logo in svg

Omron NX-SIH400, User Manual

Share
Download
Omron NX-SIH400 User Manual Download Page 324

4

On the Safety CPU Unit Setup and Programming View, perform one of the following opera-
tions.
• Select 

Mode

 – 

DEBUG Mode

 from the 

Controller

 Menu.

• Press the 

Ctrl

 + 

2

 Keys.

• Click the 

DEBUG Mode

 Button on the toolbar.

The following mode confirmation dialog box is displayed.

5

Click the 

Yes

 Button.

The following Connect to safety device Dialog Box is displayed.

Note 1. When you change the operating mode for the first time, the above dialog box is displayed and

allows you to set the node name. You can change the factory-default node name of the Safety
CPU Unit.
If you do not want to change the node name, leave the field blank and click the 

OK

 Button. Re-

fer to 

7-8 Node Name

 on page 7 - 50 for details on the node name settings.

Note 2. You do not need to enter anything in the 

Instance identification

 Box.

6

Click the 

OK

 Button.

The following transfer confirmation dialog box is displayed.

7

Check the safety of the system and then click the 

Yes

 Button.

The following password confirmation dialog box is displayed.

7 Checking Operation and Actual Operation

7 - 18

NX-series Safety Control Unit User's Manual (Z930)

Summary of Contents for NX-SIH400



















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands