Omron NX-SIH400, User Manual

Page: 75 / 626

Letter Name Function
(A) Marker attachment loca-
tions The locations where markers are attached. The markers made by OMRON
are installed for the factory setting. Commercially available markers can also
be installed.
Refer to
3-1-2 Attaching Markers on page 3 - 4.
(B) Protrusions for removing
the Unit The protrusions to hold when removing the Unit.
(C) DIN Track mounting
hook These hooks are used to mount the NX Unit to a DIN Track.
(D) NX bus connector This is the NX-series bus connector.
(E) Unit hookup guides These guides are used to connect two Units.
(F) Indicators The indicators show the current operating status and power supply status of
the Safety CPU Unit.
Refer to
2-1-3 Indicators on page 2 - 10.
(G) Unit specifications The specifications of the Safety CPU Unit are given.
l
NX-SL5500/SL5700
(D)
(D)
(E)
(C)
(I)
(F)
(E)
(A)
(G)
(H)
(C)
(C)
(B)
(E)
(B)
(B)
(G)
(H)
(E)
Let-
ter
Name Function
(A) Marker attachment loca-
tion The locations where markers are attached. The markers made by OMRON
are installed for the factory setting. Commercially available markers can also
be installed.
Refer to
3-1-2 Attaching Markers on page 3 - 4.
(B) Protrusions for removing
the Unit The protrusions to hold when removing the Unit.
(C) DIN Track mounting
hook This hook is used to mount the NX Unit to a DIN Track.
(D) NX bus connector This is the NX-series bus connector.
(E) Unit hookup guides These guides are used to connect two Units.
(F) Indicators The indicators show the current operating status and power supply status of
the Safety CPU Unit.
Refer to
2-1-3 Indicators on page 2 - 10.
(G) Service switch This switch is used for the start trigger of various functions.
2 Specifications
2 - 9
NX-series Safety Control Unit User's Manual (Z930)
2-1
Safety CPU Unit
2
2-1-2
Part Names and Functions