manualshive.com logo in svg

Omron NX-SIH400, User Manual

Share
Download
Omron NX-SIH400 User Manual Download Page 393

Particularly when using an Ethernet switch that does not support multi-cast filtering, the settings must
be made considering that multi-cast packets will be sent even to nodes without connection settings.

Additional Information

If the connection type is set to 

Multi-cast connection

 in the connection settings of the CIP

Safety or the tag data links, multi-cast packets are used. If the connection type is set to 

Point to

Point connection

, multi-cast packets are not used.

In addition, if the required CIP Safety performance or tag data link performance cannot be achieved
within the specifications, reevaluate the overall network configuration and correct it by taking steps
such as selecting a different Ethernet switch or splitting the network.
The following sections show how to check the device bandwidth to be used for the CIP Safety routings
and the tag data links in the designed network, and how to change the values.

Additional Information

In order to provide stable communications, the connection settings need to be adjusted so that
the total device bandwidth usage of tag data links and the CIP Safety routing will not exceed
80%.

9-1-1

Checking Bandwidth Usage for Tag Data Links

The Network Configurator can display the bandwidth actually used for tag data links at each built-in
EtherNet/IP port, based on the connections set in the network configuration.
The device bandwidth used by tag data links can be checked by clicking the 

Detail

 Button in the

Usage of Device Bandwidth

 Area at the bottom of the Network Configuration Pane.

Item

Description

#

The IP address of the device

Comment

A description of the device. The comment is displayed below the device icon.
The model number of the device is displayed by default.

9 Communications Load

9 - 3

NX-series Safety Control Unit User's Manual (Z930)

9-1
 Adjusting the Communications Load

9

9-1-1

 Checking Bandwidth Usage for T

ag Data Links

Summary of Contents for NX-SIH400



















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands