
121
Command/Response Reference
Section 7-5
7-5-7
WORD BLOCK DATA READ (UNSPECIFIED NODE NUMBER)
Sends the request message Word Block Data Read (Unspecified Node Num-
ber).
The remote node address specified in the control data of the CMND(490)
instruction is used for the read destination node number. The FINS command
can be executed from the CPU Unit in the FL-net Unit, but an error will occur if
the command passes through a FINS network on another layer.
Note
1.
This command is provided to ensure compatibility with applications creat-
ed with the CS1W-FLN01.
2.
Use the WORD BLOCK DATA READ/WRITE (specified node number)
commands to create new applications.
Command Block
Response Block
Parameters
First Address of the
Virtual Address Space
(Command)
Set the first address of data that will be read using hexadecimal format.
Addresses spanning multiple areas cannot be set.
Refer to
7-4 CS/CJ-series Memory Areas and Virtual Addresses
if the node
that will be read is an OMRON FL-net Unit. If it is another manufacturer’s FL-
net node however, refer to the manual for that node.
Size (Command)
Specifies up to 512 words for the number of words in data that is received.
Response Codes
Application Example
This example shows a program with the WORD BLOCK DATA READ
(unspecified node number) command.
Sample configuration
The FINS 2903 command executes at the point indicated by this mark and the
WORD BLOCK READ FRAME (transaction code: 65005) is sent.
29
03
Command
code
First address of the
virtual address space
Size
(words)
29
03
Command
code
0 to 1,024 bytes (512 words)
Completion
code
Data that is read
Response code
Description
0000
Normal completion
0101
Local node not part of network
0104
Reception buffer overflow, queuing not started (reception side)
0107
Unit's internal buffer full
0205
No response from remote node
1001
Command length too long
1002
Insufficient command length
1005
Sequence number error, sequence version error
110C
Source node is local node, requested number of words is
greater than 512.
2605
Servicing in progress
Summary of Contents for CJ1W-FLN22
