Omron CJ1W-FLN22, Operation Manual, Page: 243 / 277

217
FL-net Profile Appendix E
Note (1) Access unit: WORD
(2) Data sequence: A word corresponds to one word in a word block
Status/Mode
The data clarifying status/mode is shown below.
Supported Message Services
The following table shows which message services are supported.
Note This message service is provided as an internode test.
HR R/W 0x0032 0000 to 0x0032 01FF 512
AR R 0x0033 0000 to 0x0033 03BF 960
AR W 0x0033 01C0 to 0x0033 03BF 512
Area name R/W First word End word Size
MSB LSB
Item Details
Status type Normal
Error (operation continues)
Error (operation stops)
Status access method Read: PARTICIPATING NODE STATUS READ (FINS 06 03)
Mode type The operating mode can be selected from the following combinations
FA link table storage method: PLC internal method (default)/Unit internal method
FA link start method: Automatic addition (default)/manual addition
Broadcast format: Class C broadcast (default)/fixed
IP address specification method: 192.168.250 + node number (default)/Setup area
Mode information access
method Read: CPU UNIT DATA READ (FINS 05 01)
Write: Set from the Support Software
Relation to ULS in FA link
header Operation in progress: RUN
Operation stopped: STOP
Normal operation: NORMAL
Error (operation continues): WARNING
Error (operation stopped): ALARM
Message service Client Server
Read byte block No No
Write byte block No No
Read word block Yes Yes
Write word block Yes Yes
Read network parameter No Yes
Write network parameter No No
Stop command No No
Run command No No
Read profile No Yes
Send transparent message frame Yes Yes
Read communications log data No Yes
Clear communications log data No Yes
Echoback message Yes (See note.) Yes
Vendor message Yes Yes