Omron CJ1W-FLN22, Operation Manual, Page: 239 / 277

213
FL-net Profile Appendix E
The transfer syntax uses SEQUENCE structures for all system parameters, all common parameters, the sys-
tem parameter revision data, and all device parameters (any data structure can be used within device parame-
ters).
Device Parameters
Abstract Syntax
Type Definition
PlcmRecord::= SEQUENCE
{
syspara
SysparaType,
plcmpara PlcmType
}
SysparaType::= SEQUENCE
{
nameCOMVER
NameType,
paraCOMVER INTEGER,
nameID NameType,
paraID NameType,
nameREV NameType,
paraREV INTEGER,
nameREVDATE NameType,
paraREVDATE DateType,
nameDVCATEGORY NameType,
paraDVCATEGORY NameType,
nameVENDOR NameType,
paraVENDOR NameType,
nameDVMODEL NameType,
paraDVMODEL NameType
}
PlcmType::= SEQUENCE
{
nameID
NameType,
paraID NameType,
parameter SEQUENCE OF ParaInfo
DEFAULT{}z
Parameter name Name text
(PrintableString type)
Length, Text
Data type Parameter contents
Length_in_decimal, Contents
(Boxes indicate spaces.)
Device parameter ID 2,”ID” PrintableString 7,”DEVPARA”
Device type 7,”DEVTYPE” PrintableString 10,”CS1W-FLN22” or
10,”CJ1W-FLN22
Unit revision code 7,”UNITREV” PrintableString 1, *
(same value as unit profile)
PCB revision code 6,”PCBREV” PrintableString 3, ***
(same value as unit profile)
Software revision code 7,”SOFTREV” PrintableString 2, **
(same value as unit profile)
Lot number 5,”LOTNO” PrintableString 6, ******
(same value as unit profile)
Work area 8,”WORKAREA” PrintableString 1, 10
(same value as unit profile)
Serial number 8,”SERIALNO” PrintableString 1, ****
(same value as unit profile)