Omron CJ1W-FLN22, Operation Manual, Page: 201 / 277

175
Operating Procedures Section 11-2
2. Select Connects via network in the Network Area.
3. Click the Change settings Button to display the Change PLC Dialog Box.
Set the data for the PLC directly connected to the CX-FLnet network. (The
PLC name is “Gateway.”)
4. Set the PLC and network. To connect using Ethernet, select Ethernet in the
Network Type List, and click the Settings Button to set the IP address of
the destination node.
5. Click the OK Button to close the dialog box.